contents area

RFID Interface Module

manual download button
manual download button
manual download button

Features


Achieved high-speed communications with the MELSEC iQ-R series programmable controller CPU manufactured by Mitsubishi Electric Corporation

MELSEC iQ-R

You can mount the RFID interface module directly to the MELSEC iQ-R series to enable high-speed communications with the programmable controller CPU.


Achieved high-speed communications with the MELSEC-Q series programmable controller CPU manufactured by Mitsubishi Electric Corporation

MELSEC-Q

You can mount the RFID interface module directly to the MELSEC-Q series to enable high-speed communications with the programmable controller CPU.


Achieved distributed arrangement as the CC-Link remote device station

CC-Link

Using the RFID interface module as the CC-Link remote device station achieves connections with the RFID system V680 series manufactured by OMRON Corporation.
The module can be placed at a distance of up to 1,200 m from the CC-Link master station.


Achieved distributed arrangement as the CC-Link IE Field intelligent device station

CC-Link IE Field

Using the RFID interface module as the CC-Link IE Field intelligent device station achieves connections with the RFID system V680 series manufactured by OMRON Corporation.
The module can be placed at a distance of up to 12,000 m from the CC-Link IE Field master station.


1-channel and 2-channel modules

MELSEC iQ-R

The 1-channel module, ER-1V680D1 is connectable to a read/write antenna with a separate amplifier or a read/write antenna with a built-in amplifier.
The 2-channel module, ER-1V680D2, is connectable to two read/write antennas with separate amplifiers.


1-channel and 2-channel modules

MELSEC-Q

The 1-channel module, EQ-V680D1 is connectable to a read/write antenna with a separate amplifier or a read/write antenna with a built-in amplifier.
The 2-channel module, EQ-V680D2, is connectable to two read/write antennas with separate amplifiers.


1-channel modules

CC-Link

The 1-channel module, ECL2-V680D1 is connectable to a read/write antenna with a separate amplifier or a read/write antenna with a built-in amplifier.


2-channel module

CC-Link IE Field

The 2-channel module, ECLEF-V680D2, is connectable to two antennas with separate amplifier or one antenna with a built-in amplifier.


Equipped with tests and measurement functions required for the start-up and maintenance

MELSEC-Q CC-Link CC-Link IE Field MELSEC iQ-R

You can perform some diagnoses such as "tag communication test" and "distance level measurement"* between antennas and ID tags for start-up and maintenance.
* CC-Link IE Field module is not supported.


iQSS (iQ Sensor Solution) reducing the time for development, debugging and start-up

CC-Link

Since the RFID interface module is compatible with Mitsubishi iQSS, on the screen of Mitsubishi MELSOFT GX Works2, you can easily perform the tests and measurement functions, including the "communications test" and the "distance level measurement".
You can also check the module status (including the ON/OFF status of each signal and device values) to reduce the time for development, debugging, and start-up.


Function Block (FB) enabling the simple program development

MELSEC-Q CC-Link CC-Link IE Field MELSEC iQ-R

We offer some programs such as the parameter settings or the programs for executing the function which includes date reading/writing as Function Block (FB).
You can develop the programs easily by installing FB to your programs.
You can download the FB library applicable to the Mitsubishi MELSOFT PLC Engineering Software from the MEEFAN or Mitsubishi Electric Factory Automation Website.

In regions other than Japan, please consult your local Mitsubishi representative.

RFID Interface Module